Parts

The thermal actuator is suitable to be mounted on all underfloor heating manifolds, thermostatic valves bodies and three-way valves. Allows automatic shut-off of the system fluid under the control of a room thermostat or another electrical switching device. Features: Normally…

A spare or replacement manifold flow meter designed to fit our range of underfloor heating manifolds. The flow meter allows the flow rate to be set on each manifold port between 0 and 5 litres per minute. Customer notice: flow…

1″ blue tap underfloor heating manifold ball valve to isolate the return manifold during pressurisation of the system. These isolation valves are designed to fit our range of manifolds and have not be tested to fit any other manifold brand….

1″ red tap underfloor heating manifold ball valve to isolate the flow manifold during pressurisation of the system. These isolation valves are designed to fit our range of manifolds and have not be tested to fit any other manifold brand….

1″ blue tap underfloor heating manifold ball valve with temp gauge to allow accurate reading of the return temperature and isolate the return manifold during pressurisation of the system. Customer Notice: These isolation valves are designed to fit our range…

1″ red tap underfloor heating manifold ball valve with temp gauge to allow accurate reading of the flow temperature and isolate the flow manifold during pressurisation of the system. Customer Notice: These isolation valves are designed to fit our range…

Underfloor heating manifold end unit with hose pipe connecter to drain and fill the system. Comes with a blue tap for attachment to the lower return manifold. Customer Notice: These end units are designed to fit our premium and budget…

Underfloor heating manifold end unit with hose pipe connecter to drain and fill the system. Comes with a red tap for attachment to the upper flow manifold. Customer Notice: These end units are designed to fit our premium and budget…

The manifold bypass may be required when using electronic controls without a delay. The bypass allows the pump to function without needing the actuators to by fully opened. It’s main function is allowing a minimum flow to be maintained through the…

Our universal range of eurocone pipe connectors are suitable for connecting both EVOH Pert and Pert Al Pert pipe to any 3/4″ manifold port. Each fitting includes an olive, insert and connection nut as shown in the picture. Available for 12,…

The repair coupler provides a quick and simple solution to repair a damaged section of underfloor heating pipe. How to use: Cut both sides of the damaged section of pipe Slide the olives onto the pipe Push the inserts into the…

1″ BSP compression blank cap to seal off unused manifold ports. Fits both premium and budget range of underfloor heating manifolds.  

Designed for 16mm pipe this professional, solid metal pipe reamer is used bevel and smooth the end of pipe in preparation for connection to manifold connector cores or pipe fittings. The reamer ensures a clean finish and fit with pipe connectors. Simply…