Delivery cut-off is 1pm Thursday 18th Dec. Our offices will close at 1:00pm on Friday 19th Dec, reopening on Monday 5th Jan. Orders can still be placed online during this time and will be despatched when we return in January.

Call our Team:01625 466258

2

Home / Water Underfloor Heating

Water Underfloor Heating

Our Water Underfloor Heating systems deliver efficient, reliable warmth for new builds, retrofits, and upper floors, giving you comfort and lower running costs.

“2 Wire 230v Underfloor Heating Actuator” has been added to your basket. View basket

20mm Foil Coated XPS400 Insulated Overlay Board
£11.89inc.VAT
Add to basket
300m Premium 16mm Pert-Al-Pert Pipe for Warm Water Underfloor Heating Systems
£220.00inc.VAT
Add to basket
200m Premium 16mm Pert-Al-Pert Pipe for Warm Water Underfloor Heating Systems
£147.00inc.VAT
Add to basket
12×1.6mm Underfloor Heating Pipe Repair Coupler
£11.49inc.VAT
Add to basket
16×1.5mm Underfloor Heating Pipe Repair Coupler
£13.49inc.VAT
Add to basket
17x2mm Underfloor Heating Pipe Repair Coupler
£13.99inc.VAT
Add to basket
Thermostatic Valve Core
£6.49inc.VAT
Add to basket
150m Premium 16mm Pert-Al-Pert Pipe for Warm Water Underfloor Heating Systems
£159.99inc.VAT
Add to basket
2 Wire 230v Underfloor Heating Actuator
£12.49inc.VAT
Add to basket
2 Wire 24v Underfloor Heating Actuator
£12.49inc.VAT
Add to basket
4 Wire 24v Underfloor Heating Actuator
£12.49inc.VAT
Add to basket
4 Wire 230v Underfloor Heating Actuator
£12.49inc.VAT
Add to basket
Plastic Pipe Reamer for 20, 25, 32mm Pipe
£5.99inc.VAT
Add to basket
150m Premium 16mm Pert-Al-Pert Pipe for Warm Water Underfloor Heating Systems
£110.00inc.VAT
Add to basket
100m Premium 16mm Pert-Al-Pert Pipe for Warm Water Underfloor Heating Systems
£74.00inc.VAT
Add to basket
3/4″ Isolation Ball Valve Set
£22.99inc.VAT
Add to basket

Shop Water Underfloor Heating Components

Accessories

Fixtures

Insulation

Manifolds

Overlay Panels

Pipe

Pumps & Mixers

Tools

What is Water Underfloor Heating?

A Wet Underfloor Heating System in Screed

Water underfloor heating is also known as a “hydronic system” or “wet” – it can sit beneath stone, tile, wooden, laminate and carpeted floor. For water underfloor heating to be fitted, there has to be enough space for the pipes to be laid beneath the flooring. Depending on the amount of space available and the floor, the pipes will be set either into concrete screed which is usual for ground floors, heat diffuser plates across on timber joists or grooved insulation panels for floating floors. If there is insufficient space there may be a need for the floor to be raised.

Benefits of Water Underfloor Heating

Water underfloor heating circulates warm water through a network of pipes beneath your floor, creating an even and comfortable warmth across the whole room. By working at lower temperatures than traditional radiators, it is highly efficient and pairs perfectly with modern boilers and renewable heat sources like heat pumps.

Water Underfloor Heating Systems are ideal for new builds, extensions, and large renovation projects, offering a long-term, energy-efficient solution that increases both comfort and property value.

When installed correctly, Water Underfloor Heating requires very little maintenance and provides reliable heating for decades. All our systems are designed for durability and backed by a Lifetime Warranty.

• Energy-Efficient Whole Home Heating
• Works Perfectly with Heat Pumps & Modern Boilers
• Even Heat Distribution Across the Floor
• Lower Running Costs Compared to Radiators
• Compatible with Most Floor Finishes
• Free Up Wall Space by Removing Radiators
• Adds Long-Term Value to Your Property
• Reliable & Low Maintenance

Installation Manuals

Download our Installation Manuals for Water Underfloor Heating Systems and components:

Water Underfloor Heating FAQs

What is water underfloor heating and how does it work?
Water underfloor heating (often called a wet system) uses a series of pipes fitted beneath the floor. Warm water is circulated through these pipes from your boiler or heat pump, gently heating the floor surface which then radiates heat evenly throughout the room.
What type of boiler do I need for water underfloor heating?
Most modern boilers, including combi, system, and heat-only boilers, can run water underfloor heating. Heat pumps also work perfectly. The key is ensuring the system is designed with the right flow temperature and controls for efficiency.
Will it be more expensive to run than radiators?
No — in fact, water underfloor heating is typically cheaper long-term. Because it works at lower temperatures, it’s more efficient when paired with a modern boiler or heat pump.
Do I need a water tank for underfloor heating?
Not always. If you use a combi boiler, no hot water tank is needed. For system or heat-only boilers, a tank may already be part of your setup.
Do I need a plumber to install water underfloor heating?
Yes — a qualified plumber or heating engineer should handle the connection to your boiler and manifold. However, many customers complete the floor preparation and pipe laying themselves, leaving the final hookup to the professional.
Can I keep radiators upstairs and just install underfloor heating downstairs?
Absolutely. This is a common setup. Your home can be zoned so the underfloor heating runs downstairs while radiators remain upstairs, all controlled from one system.
Do I need to zone my system?
Yes — zoning ensures each room or area can be controlled individually. This improves comfort and efficiency, as you only heat the spaces you use.
What floor types can The Underfloor Heating Companies water systems be fitted into?
They can be installed in screed, between joists, or using overlay panels. This makes them suitable for new builds, extensions, and retrofits.
What’s the lowest depth system I can install?
Our overlay water systems start from as little as 18mm depth, making them ideal for retrofit projects where floor height is limited.
Do manifolds have to be horizontal, or can they be fitted differently?
Manifolds are usually mounted horizontally for best performance, but if space is tight, our team can advise on alternative installation options.
Can I mount the ground floor manifold in the basement?
Yes, but you’ll need to ensure correct pump pressure and flow rates. It’s possible but should be planned with your installer to avoid circulation issues.
Do I need a motorised valve?
A motorised valve is recommended for most multi-zone systems, as it improves efficiency and ensures the system only heats when required.
I have a new extension — can I just install water underfloor heating there?
Definitely. Many customers choose to fit underfloor heating in new extensions while leaving the rest of the property on its existing system.
Can it go over an existing tiled floor?
Yes — overlay panels can be fitted over existing tiles, provided the surface is sound and level. This avoids the need to rip up your old floor.
My tiler wants to use a levelling compound over the DUO panels. Is that OK?
Yes, a self-levelling compound can be applied over DUO panels before tiling, creating a smooth and durable surface.
Can I use it with solid wood or laminate floors?
Yes — engineered or laminate wood is ideal. Solid wood can also be used, but it’s more prone to expansion, so always check the flooring manufacturer’s guidance.
How do I calculate how much pipe I’ll need?
Pipe quantities depend on room size and layout. Our design team can provide a tailored pipe layout plan and calculate the exact amount required.
How do I work out flow rates and set these on the manifold?
Each circuit’s flow rate is calculated during system design. Once installed, you simply adjust the flow meters on the manifold to match the recommended rates provided in your design pack.

Subscribe to our Mailing List

Receive unique offers and special discounts on our products

Next Day Delivery
100% Secure Shopping
Price Match
Lifetime Warranty
30 Day Returns